Description

Resistance to your turn signals

Discreet LED resistance in a very small design with cooling fins, for mounting in extension of the wiring harness on your LED turn signals, to reduce the flashing frequency if you have a normal turn signal relay.

The resistor is soldered into the existing wiring harness, with frame (minus) from turn signals and wiring and plus from turn signals and wiring, so that the current flows through the resistor to reach the turn signal and vice versa.

These resistors are suitable when going from a 21 watt turn signal bulb, to LED.

Remember: Resistors become hot due to the current it absorbs. Then mount them in a place where they do not risk melting and where there is plenty of air around them to cool them down.

Dimensions and technical info:

• Resistance: 26.5×15.5mm
• Length incl. wires: 260mm
• Number of wires: 4 – 2x ground, 2x plus
• 25 watts
• 10 Ohm

Which wires are what ?:

• Black: Frame
• Yellow: Plus

Note: One resistor must be used per flashing lights.