Description

Quick-drying filler / primer for wood, metal and aluminum

MoTip Filler 400ml is specially designed to smooth out small irregularities in both treated and untreated metal, wood and aluminum to prepare the surface for painting. The quick-drying filler is compatible with all lacquer systems and then it has a really good opacity and excellent filling properties, which makes it easy to work with. You decide whether you want to sand MoTip Filler while it is wet or while it is dry, so it is not difficult to create a smooth and even surface (use sandpaper from grain 400). MoTip Filler is rust-preventing and comes in a can of 400 ml.

MoTip Filler – Your friend in need

If you need to fix the inevitable small scratches, then MoTip Filler may well be your friend in need. MoTip Filler ensures you a uniform surface so you have the best conditions to get a nice and shiny varnish again.

Remember to shake thoroughly

Start by shaking the MoTip Filler thoroughly, and apply a thin, even layer on a completely dry, clean surface at a distance of approximately 25-30 cm. Repeat as needed, paying attention to shaking the can between each layer. Then let the filler dry. Drying time depends on temperature. humidity and thickness of the lacquer layer. Always clean the nozzle when you are done to make sure it does not stop. This is easily done by turning the can upside down, and then holding the nozzle inside for approx. 5 seconds.