Description

The Stage6 R/T Big Drill Bits Crankshafts are full round, which ensures a higher primary compression. The quality is very high, as it is made of heavy-duty steel and has no plastic fillings, which increases the overall weight of the Crankshafts. Developed for use in the Stage6 Racing team’s own machines, it has been improved in several ways. For example, the bottom bearing at the connecting rod is 18mm compared to the original 16mm, there are silver washers between the connecting rod and Crankshafts, reinforced silver bottom bearing and forged connecting rod. The Crankshafts have a 44mm stroke and a rod90 connecting rod. The shaft to the Variators has been reinforced and is without beams, which is why only Variators without beams in the back plate can be used – such as Malossi MHR Overrange (without beams), Polini Evolution and Stage6 Oversize. Crankshafts can be used for e.g. Stage6 R/T Big Drill Bits 95ccm cylinder kit. One 14mm Needle Bearings (14X17X17) is included, as well as a larger Nuts for the variator side.