Description

Power distributor from Oxford

Nothing less than an ingenious product from Oxford that means you only need one device connected directly to the 12V battery of your machine, and the Oxford Junction Box has four pairs of 5A 12V DC sockets that you can use for LED strips, LED spotlights, LED bars, phone chargers, heating handles or whatever else you might need. The box is connected with three wires: plus and minus to the battery, and one to plus on ignition, so the box does not drain the battery when the engine is off.

The Oxford Junction Box has a built-in relay, an LED status indicator and a 5A fuse for each port, so each connected device can function independently even if a fuse on another port shorts out.

The Oxford Junction Box comes included:

• 70cm cable from box to cable lug.
• 4 x 5A fuses, already installed in the box.
• 1 x 3A fuse.
• 1 x 2A fuse.
• 2 x Cable strips.
• 1 x Cable collector.
• 1 x Double-sided adhesive mounting pad.

Find user guide and technical specifications via the link here.

Note: The Oxford Junction Box is not waterproof and it is therefore recommended that it is mounted where it is not exposed to water or moisture.